Stages of adaptation of the Chevrolet Cruze automatic transmission:

1. Connecting a diagnostic scanner:

* Connect the OBD-II diagnostic scanner to the vehicle’s diagnostic port.
* Turn on the ignition without starting the engine.

2. Access to the automatic transmission control unit:

*Using the scanner menu, navigate to the Transmission Control Module (TCM).

3.Transmission type identification:

* Determine the type of automatic transmission installed in your Chevrolet Cruze.
*This information is usually found on a label on the transmission or in the vehicle’s manual.

4. Selecting an adaptation procedure:

* In the TCM menu, find the adaptation procedure for the corresponding transmission type.
* Select the appropriate procedure depending on the work performed.

5. Carrying out the adaptation procedure:

*Follow the instructions on the scanner screen to complete the adaptation procedure.
*The procedure typically involves changing gears at various speeds and under various driving conditions.

6. Reset adaptive values:

* After completing the adaptation procedure, reset the TCM adaptive values.
*This procedure will clear all previously learned driving parameters and reset the TCM to factory settings.

7. Completion of the procedure:

* Turn off the ignition and disconnect the scanner.
* Start the engine and check if the gears shift correctly.

Note:

*Exact adaptation steps may vary slightly depending on vehicle year and transmission model.
* It is recommended that you consult your vehicle’s manual or a qualified mechanic for specific instructions.

Thanks for reading!